What Factors Affect a Region's Climate?

A region's climate is shaped by influences operating on all scales of space and time from microscale to global. Many factors work together to shape the climate of any locality.

This page lists and describes some of the factors that control or help determine the climate of a particular region. There are certainly others. Some of these factors can also be used to explain differences from one day to the next at one given location. For example, a humid, cloudy climate zone will generally have less variability in temperature during the year than a dry, sunny climate zone (the reasons are provided below). For the same reasons, a dry, cloud-free day will generally have a bigger difference between the nighttime low and daytime high temperature than a humid, cloudy day. Some controling factors for climate consist of:

Latitude - most important climatic control, due to the effect is has on the amount of solar radiation reaching the Earth's surface. The seasonal changes in incoming solar radiation, as well as the length of the day, vary with latitude. In general, tropical regions experience little seasonal changes since the amount of solar radiation received changes little during the year. Seasonal changes get more pronounced the further you move away from the tropics toward the polar regions. The largest seasonal changes are found in the arctic and antarctic regions because this is where there are the largest changes in the amount of solar radiation received during the year. If you consider the average temperature over one year, in general areas nearer to the equator are warmer than areas farther from the equator.

The figure above shows the general pattern of precipitation at different latitudes. This is related to where areas of rising and sinking motion are most likely based on the general circulation patterns around the globe. Keep in mind that the positions of the ITCZ (Intertropical Convergence Zone) and the polar fronts move with the seasons. For example, in Northern Hemisphere Summer, the ITCZ moves north of the equator because the maximum solar heating moves north of the equator AND the position of the polar front moves north since the warm/cold boundary is further north. In the Northern Hemisphere winter, both of these features move toward the south. Note that these generalizations concerning temperature and precipitation are due to changes of latitude alone, while the actual climate of a region also depends on some of the other factors listed below.

Elevation - Influences air temperature (since temperatures usually decrease with height by about 6.5°C per 1000 meters or 3.6°F per 1000 ft) and can thus influence whether precipitation falls in the form of rain or snow. A local example is provided by the differences in temperature and precipitation between Tucson and Mount Lemon. Often in the winter precipitation in the valley is in the form of rain, while over the mountains it is in the form of snow.

Another difference between high altitude locations (mountains) and low altitude locations (sea level) is that the daily temperature extremes between day and night are much greater at higher elevations. This is mainly because there is so much less atmosphere above high elevation locations (i.e., less air molecules). During the day, less atmosphere means that it is easier for the Sun's energy to reach the surface and heat it. At night, less atmosphere means fewer greenhouse gases and a weaker greenhouse effect, so the surface cools very rapidly.

Proximity to Mountain Ranges - mountain ranges can affect the climate for considerable distances by stimulating cyclone formation. Another way to state this is that large mountain ranges in the middle latitudes have some influence on the large-scale weather pattern, i.e., the height pattern on 500 mb maps. Locally, orographic clouds and precipitation form on windward facing slopes, while a rain shadow is often found on the leeward slopes. An example of the effect of topography on precipitation is shown in the figure above.

Proximity to Large Bodies of Water - The ocean's

Specific Heat of Various Substances.

Substance	Specific Heat
Water	1.00
Air	0.24
Granite	0.19
Sand	0.19
Iron	0.11

"moderating influence" is an important determinant of a region's climate. What this means is that land areas near large bodies of water have more constant temperatures between summer and winter and between day and night compared to land areas far away from large bodies where there are often very large differences between summer and winter and between day and night. There are three main reasons for this:

1. Solar radiation energy reaching the land surface is absorbed in a thin layer of soil, so the very top of soil heats rapidly. Conversely, solar radiation energy that hits water is absorbed over a great depth. Therefore, the water surface temperature changes slowly. In addition, because water is able to circulate, it distributes its energy through a much deeper layer compared to land surfaces where heat transfers between surface and subsurface layers is slow. Water is slower to heat during day and slower to cool during the night.
2. Much of the energy that is absorbed by the oceans is used to evaporate water. Remember we called the energy associated with phase changes of water "latent heat" because the energy is not used to change the temperature of the water, but rather to change its phase (from liquid to vapor for evaporation). On the other hand for dry soil most of the energy absorbed goes into raising the temperature of the ground. Using the same concept, wet soils, then will warm more slowly than dry soils since some of the energy is used to evaporate the water in the soil.
3. Water has a high specific heat . It takes a great deal more heat to raise the temperature of 1 gram of water 1°C than in does to raise the temperature of 1 gram of soil or rock by 1°C. Also keep in mind that wet soil will have a higher specific heat than dry soils.

Therefore, over the course of a typical day (daily cycle), the land heats more rapidly and to a higher surface temperature than surrounding water, and it cools more rapidly and to a lower surface temperature than water for the same amount of incident solar energy. On longer time scales (yearly cycle), ocean temperatures are slow to change with the seasons. Compared to the continental land areas, ocean surface temperatures change little between summer and winter (see World Monthly Temperature Annimation). The closer a land area is to the ocean, the more it is influenced by the ocean, and the more moderate the climate.

The circulation of the ocean is a another key factor in air temperature distribution.

Ocean currents that have a northward or southward component, such as the warm Gulf Stream in the North Atlantic or the cold Humboldt Current off South America, effectively exchange heat between low and high latitudes.

The circulation of the ocean.

A good example of the effect of a warm current is that of the Gulf Stream in January, which causes a strong east-west gradient in temperatures across the eastern edge of the North American continent.

Notice the vegetation patterns on the mountain pictured above.

The relative warmth of the Gulf Stream affects air temperatures all the way across the Atlantic, and prevailing westerlies extend the warming effect deep into northern Europe. As a result, January temperatures of Tromsø, Norway (69°40'N), for example, average 24°C above the mean for that latitude.

Relative humidity / Soil Moisture - These often go together. A location with dry surface (like desert rock or sand) will also generally have lower relative humidities. Wet surfaces tend to stay cooler during the day because much of the sun's energy is used to evaporate water, rather than heat the surface. In addition, wet surfaces have a higher specific heat than dry surfaces, meaning that more energy must be gained (lost) to warm (cool) the surface. During the day, high concentrations of water vapor directly absorb radiation from the Sun, keeping the ground surface cooler. High relative humidity also causes aerosol particles to swell so that they absorb and reflect more radiation from the sun before it reaches the ground. However, the most important influence of water vapor in the atmosphere on surface temperature happens at night. At night, places with higher amounts of water vapor in the atmosphre tend to stay warmer because water vapor is a greenhouse gas. Therefore, even when comparing clear sky conditions, desert regions like Tucson tend to have very large temperature swings between day and night compared with a non desert location.

Local topography - Variations in the slope of the ground affects the absorbed sunlight, exposure to winds, and runoff.

Prevailing atmospheric circulation - This last control encompasses the combined influence of all weather systems.

Other Variable Factors:

Cloud cover - All of the above factors influence the amount and type of cloud cover experienced by a local region. In general, clouds are a cooling influence during the day by reflecting solar radiation, and a warming influence at night because they emit infrared radiation (same principle as greenhouse effect for gases). Thus, locations with high amounts of cloud cover tend to experience less temperature variation over a day (cooler days, warmer nights) compared with a location with clear conditions.

Nature of the surface - Local surface conditions might shape climate to a considerable extent. Consider the where would you choose to sit (or even stand) on a sunny day in July... Have you noticed differences in temperature as you drive out of Tucson city limits on a summer evening? Some examples:

• shaded surfaces (under trees for example) do not get as hot as surfaces under direct sunshine.
• Vegetated lands do not heat as rapidly as sand or rock because some of the energy input is used by the plants to grow and transpire.
• The reflectance of a surface is important: black surfaces absorb more of the sun's energy than white surfaces.
• As mentioned above wet surfaces heat and cool more slowly than dry surfaces.

Anthropogenic effects - Agriculture and other human induced changes in the amount of vegetation might have variable effects on local climate. With less vegetation, the surface has less moisture available for evaporation. As a result, it experiences higher temperatures than the forested region. In addition, urban areas become "heat islands", i.e., warmer than the surrounding countryside for two main reasons:

1. The asphalt, bricks, roofing materials, etc. of which modern cities are constructed better absorb solar radiation than soils and vegetation.
2. Human activities (power generation, transportation, etc.) generate heat, which warms cities.

Link to Earth's Climate Zones

There are various ways to categorize the diverse climate zones around the world. The link below is just one example. Unfortunately, we don't have time to cover this topic in detail. The Koppen Climate Zones